Tension Rings – Osbon ErecAid https://osbon.co.nz ErecAid Vacuum Therapy System Sun, 01 Feb 2026 02:13:56 +0000 en-AU hourly 1 https://wordpress.org/?v=5.5.17 https://osbon.co.nz/wp-content/uploads/2022/02/cropped-cropped-favicon-osbon-32x32.png Tension Rings – Osbon ErecAid https://osbon.co.nz 32 32 Osbon A Ring – Large, Standard Tension Ring, Beige https://osbon.co.nz/product/a-ring-large-standard-tension-ring-beige/ Thu, 29 Jun 2017 07:25:23 +0000 http://localhost/osbon.com.au/?post_type=product&p=39 Ring-Tension-Chart.pdf]]> Osbon® Tension Ring – A

Large, Standard Tension, Beige in Colour.  Corresponds with Level One on our ring tension chart.
Uniquely designed and patented by Osbon®. The best tension rings available on the market.  The unique shape provides maximum comfort, with a “U” notch at the base, and two pressure points at the top.  Perfectly designed for the male anatomy.
Beige rings are of a standard tension, whilst Pink rings are a high tension.  Each ring is identified with the appropriate identifying letter (A, B, C or D).
When purchasing a complete ErecAid® System, all 4 rings are included (A, B, C and D).  These rings vary in both size and tension.  A and B are Large diameter (.875 of an inch internal diameter), and C and D are Medium diameter (.750 of an inch internal diameter).
If you need a tighter ring, try the B ring, if you need a looser ring, try the Maximum Elasticity, Large Grey Ring.
]]> Osbon B Ring – Large, High Tension Ring, Pink https://osbon.co.nz/product/b-ring-large-high-tension-ring-pink/ Thu, 29 Jun 2017 07:25:56 +0000 http://localhost/osbon.com.au/?post_type=product&p=40 Ring-Tension-Chart.pdf]]> Osbon® Tension Ring – B

Large, High Tension, Pink in Colour.  Corresponds with Level Two on our ring tension chart.
Uniquely designed and patented by Osbon®. The best tension rings available on the market.  The unique shape provides maximum comfort, with a “U” notch at the base, and two pressure points at the top.  Perfectly designed for the male anatomy.
Beige rings are of a standard tension, whilst Pink rings are a high tension.  Each ring is identified with the appropriate identifying letter (A, B, C or D).
When purchasing a complete ErecAid® System, all 4 rings are included (A, B, C and D).  These rings vary in both size and tension.  A and B are Large diameter (.875 of an inch internal diameter), and C and D are Medium diameter (.750 of an inch internal diameter).
If you need a tighter ring, try the C ring, if you need a looser ring, try the A Ring.
]]> Osbon C Ring – Medium, Standard Tension Ring, Beige https://osbon.co.nz/product/c-ring-medium-standard-tension-ring-beige/ Thu, 29 Jun 2017 07:26:05 +0000 http://localhost/osbon.com.au/?post_type=product&p=41 Ring-Tension-Chart.pdf]]> Osbon® Tension Ring – C

Medium, Standard Tension, Beige in Colour.  Corresponds with Level Three on our ring tension chart.
Uniquely designed and patented by Osbon®. The best tension rings available on the market.  The unique shape provides maximum comfort, with a “U” notch at the base, and two pressure points at the top.  Perfectly designed for the male anatomy.
Beige rings are of a standard tension, whilst Pink rings are a high tension.  Each ring is identified with the appropriate identifying letter (A, B, C or D).
When purchasing a complete ErecAid® System, all 4 rings are included (A, B, C and D).  These rings vary in both size and tension.  A and B are Large diameter (.875 of an inch internal diameter), and C and D are Medium diameter (.750 of an inch internal diameter).
If you need a tighter ring, try the D ring, if you need a looser ring, try the B Ring.
]]> Osbon D Ring – Medium, High Tension Ring, Pink https://osbon.co.nz/product/d-ring-medium-high-tension-ring-pink/ Thu, 29 Jun 2017 07:26:13 +0000 http://localhost/osbon.com.au/?post_type=product&p=42 Ring-Tension-Chart.pdf]]> Osbon® Tension Ring – D

Medium, High Tension, Pink in Colour.  Corresponds with Level Four on our ring tension chart.
Uniquely designed and patented by Osbon®. The best tension rings available on the market.  The unique shape provides maximum comfort, with a “U” notch at the base, and two pressure points at the top.  Perfectly designed for the male anatomy.
Beige rings are of a standard tension, whilst Pink rings are a high tension.  Each ring is identified with the appropriate identifying letter (A, B, C or D).
When purchasing a complete ErecAid® System, all 4 rings are included (A, B, C and D).  These rings vary in both size and tension.  A and B are Large diameter (.875 of an inch internal diameter), and C and D are Medium diameter (.750 of an inch internal diameter).
If you need a tighter tension, try Level 5 on the Ring Tension Chart, which is a combination of two rings, C and A together.
If you need a looser ring, try the C Ring.
]]> Osbon ErecAid Comfort Ring https://osbon.co.nz/product/comfort-ring/ Thu, 29 Jun 2017 07:27:35 +0000 http://localhost/osbon.com.au/?post_type=product&p=46 Osbon® Tension Ring – Supersoft Ring

Also called Comfort Ring

Designed as a practise ring, for men unsure about the ring loading process. A single use ring.
Not provided in the standard kit with the ErecAid® Systems.
]]> Osbon EZ Tension Ring (Number 4) https://osbon.co.nz/product/ez-tension-ring-number-4/ Thu, 29 Jun 2017 07:28:07 +0000 http://localhost/osbon.com.au/?post_type=product&p=47 EZ Ring Instruction Guide.pdf]]> The EZ Rings are a specialty range of rings for use with the ErecAid System cylinder.  The EZ Range of rings have been designed to address the issue of scrotal tissue being drawn into the cylinder.  They also benefit men who require a tighter tension than the single Osbon A, B, C or D rings offer.

Do not use the Osbon Ring Loader with the EZ Rings.  The grey cylinder inserts are also not required, just use the Osbon Cylinder without the inserts.

The EZ Rings are made of a clear, soft pliable plastic.  They have a centre opening, of a similar shape to the Osbon Rings, but with a flange attached.  The outer rim of the EZ Ring fits snugly over the end of the cylinder, like a lid.

This creates a firm seal and a barrier between the negative pressure being created in the cylinder, and the body.  This design also ensures that the scrotal tissue is not drawn into the cylinder when pumping.  These advantages give many patients a more comfortable tension ring fit and more tension to assist in maintaining penile rigidity.

Once an erection has been created, the ring is slipped off the end of the cylinder and remains at the base of the erect penis minimising the ring transfer process.  EZ Tension Rings are intended for use with ErecAid Esteem and Classic Cylinders.

You may need to experiment with different ring sizes to find the right ring for you.  The guide below may provide some assistance.  Always try to keep the erection with the least amount of tension.

Feedback from men who have tried these rings: 

  • The EZ Rings are bulkier than the Standard Osbon Tension Rings, but it does usually solve the issue of scrotal tissue being drawn into the cylinder, which is an important issue to resolve.
  • It is a matter of personal choice, some men don’t like the EZ Rings, others do.  Definitely worth a try.

Determine your EZ Ring Size:

EZ Tension Ring #7 (21119)

Has the same inside diameter and similar tension to the “C” Standard Tension Ring

EZ Tension Ring #6 (21177)

Has the same inside diameter and similar tension to the “D” Standard Tension Ring

EZ Tension Ring #5 (21170)

Has tighter tension and smaller inside diameter than any Standard Tension Ring

EZ Tension Ring #4 (21164)

The smallest available size with the tightest tension of any Standard or Specialty Tension Ring

 

EZ Ring Instructions

EZ Ring Instruction Guide.pdf

]]> Osbon EZ Tension Ring (Number 5) https://osbon.co.nz/product/ez-tension-ring-number-5/ https://osbon.co.nz/product/ez-tension-ring-number-5/#comments Thu, 29 Jun 2017 07:28:19 +0000 http://localhost/osbon.com.au/?post_type=product&p=48 EZ Ring Instruction Guide.pdf]]> The EZ Rings are a specialty range of rings for use with the ErecAid System cylinder.  The EZ Range of rings have been designed to address the issue of scrotal tissue being drawn into the cylinder.  They also benefit men who require a tighter tension than the single Osbon A, B, C or D rings offer.

Do not use the Osbon Ring Loader with the EZ Rings.  The grey cylinder inserts are also not required, just use the Osbon Cylinder without the inserts.

The EZ Rings are made of a clear, soft pliable plastic.  They have a centre opening, of a similar shape to the Osbon Rings, but with a flange attached.  The outer rim of the EZ Ring fits snugly over the end of the cylinder, like a lid.

This creates a firm seal and a barrier between the negative pressure being created in the cylinder, and the body.  This design also ensures that the scrotal tissue is not drawn into the cylinder when pumping.  These advantages give many patients a more comfortable tension ring fit and more tension to assist in maintaining penile rigidity.

Once an erection has been created, the ring is slipped off the end of the cylinder and remains at the base of the erect penis minimising the ring transfer process.  EZ Tension Rings are intended for use with ErecAid Esteem and Classic Cylinders.

You may need to experiment with different ring sizes to find the right ring for you.  The guide below may provide some assistance.  Always try to keep the erection with the least amount of tension.

Feedback from men who have tried these rings: 

  • The EZ Rings are bulkier than the Standard Osbon Tension Rings, but it does usually solve the issue of scrotal tissue being drawn into the cylinder, which is an important issue to resolve.
  • It is a matter of personal choice, some men don’t like the EZ Rings, others do.  Definitely worth a try.

Determine your EZ Ring Size:

EZ Tension Ring #7 (21119)

Has the same inside diameter and similar tension to the “C” Standard Tension Ring

EZ Tension Ring #6 (21177)

Has the same inside diameter and similar tension to the “D” Standard Tension Ring

EZ Tension Ring #5 (21170)

Has tighter tension and smaller inside diameter than any Standard Tension Ring

EZ Tension Ring #4 (21164)

The smallest available size with the tightest tension of any Standard or Specialty Tension Ring

 

EZ Ring Instructions

EZ Ring Instruction Guide.pdf

]]> https://osbon.co.nz/product/ez-tension-ring-number-5/feed/ 1 Osbon EZ Tension Ring (Number 6) https://osbon.co.nz/product/ez-tension-ring-number-6/ Thu, 29 Jun 2017 07:28:42 +0000 http://localhost/osbon.com.au/?post_type=product&p=49 EZ Ring Instruction Guide.pdf]]> The EZ Rings are a specialty range of rings for use with the ErecAid System cylinder.  The EZ Range of rings have been designed to address the issue of scrotal tissue being drawn into the cylinder.  They also benefit men who require a tighter tension than the single Osbon A, B, C or D rings offer.

Do not use the Osbon Ring Loader with the EZ Rings.  The grey cylinder inserts are also not required, just use the Osbon Cylinder without the inserts.

The EZ Rings are made of a clear, soft pliable plastic.  They have a centre opening, of a similar shape to the Osbon Rings, but with a flange attached.  The outer rim of the EZ Ring fits snugly over the end of the cylinder, like a lid.

This creates a firm seal and a barrier between the negative pressure being created in the cylinder, and the body.  This design also ensures that the scrotal tissue is not drawn into the cylinder when pumping.  These advantages give many patients a more comfortable tension ring fit and more tension to assist in maintaining penile rigidity.

Once an erection has been created, the ring is slipped off the end of the cylinder and remains at the base of the erect penis minimising the ring transfer process.  EZ Tension Rings are intended for use with ErecAid Esteem and Classic Cylinders.

You may need to experiment with different ring sizes to find the right ring for you.  The guide below may provide some assistance.  Always try to keep the erection with the least amount of tension.

Feedback from men who have tried these rings: 

  • The EZ Rings are bulkier than the Standard Osbon Tension Rings, but it does usually solve the issue of scrotal tissue being drawn into the cylinder, which is an important issue to resolve.
  • It is a matter of personal choice, some men don’t like the EZ Rings, others do.  Definitely worth a try.

Determine your EZ Ring Size:

EZ Tension Ring #7 (21119)

Has the same inside diameter and similar tension to the “C” Standard Tension Ring

EZ Tension Ring #6 (21177)

Has the same inside diameter and similar tension to the “D” Standard Tension Ring

EZ Tension Ring #5 (21170)

Has tighter tension and smaller inside diameter than any Standard Tension Ring

EZ Tension Ring #4 (21164)

The smallest available size with the tightest tension of any Standard or Specialty Tension Ring

 

EZ Ring Instructions

EZ Ring Instruction Guide.pdf

]]> Osbon EZ Tension Ring (Number 7) https://osbon.co.nz/product/ez-tension-ring-number-7/ Thu, 29 Jun 2017 07:28:55 +0000 http://localhost/osbon.com.au/?post_type=product&p=50 EZ Ring Instruction Guide.pdf]]> The EZ Rings are a specialty range of rings for use with the ErecAid System cylinder.  The EZ Range of rings have been designed to address the issue of scrotal tissue being drawn into the cylinder.  They also benefit men who require a tighter tension than the single Osbon A, B, C or D rings offer.

Do not use the Osbon Ring Loader with the EZ Rings.  The grey cylinder inserts are also not required, just use the Osbon Cylinder without the inserts.

The EZ Rings are made of a clear, soft pliable plastic.  They have a centre opening, of a similar shape to the Osbon Rings, but with a flange attached.  The outer rim of the EZ Ring fits snugly over the end of the cylinder, like a lid.

This creates a firm seal and a barrier between the negative pressure being created in the cylinder, and the body.  This design also ensures that the scrotal tissue is not drawn into the cylinder when pumping.  These advantages give many patients a more comfortable tension ring fit and more tension to assist in maintaining penile rigidity.

Once an erection has been created, the ring is slipped off the end of the cylinder and remains at the base of the erect penis minimising the ring transfer process.  EZ Tension Rings are intended for use with ErecAid Esteem and Classic Cylinders.

You may need to experiment with different ring sizes to find the right ring for you.  The guide below may provide some assistance.  Always try to keep the erection with the least amount of tension.

Feedback from men who have tried these rings: 

  • The EZ Rings are bulkier than the Standard Osbon Tension Rings, but it does usually solve the issue of scrotal tissue being drawn into the cylinder, which is an important issue to resolve.
  • It is a matter of personal choice, some men don’t like the EZ Rings, others do.  Definitely worth a try.

Determine your EZ Ring Size:

EZ Tension Ring #7 (21119)

Has the same inside diameter and similar tension to the “C” Standard Tension Ring

EZ Tension Ring #6 (21177)

Has the same inside diameter and similar tension to the “D” Standard Tension Ring

EZ Tension Ring #5 (21170)

Has tighter tension and smaller inside diameter than any Standard Tension Ring

EZ Tension Ring #4 (21164)

The smallest available size with the tightest tension of any Standard or Specialty Tension Ring

 

EZ Ring Instructions

EZ Ring Instruction Guide.pdf

]]> VenoSeal Adjustable Loop Ring https://osbon.co.nz/product/venoseal-adjustable-loop-ring/ Thu, 29 Jun 2017 07:27:26 +0000 http://localhost/osbon.com.au/?post_type=product&p=45 VENOSEAL Instructions For Use.PDF VenoSeal BrochureColour.pdf VenoSealBrochure2017.pdf]]>

The VenoSeal is a new product, designed for men who are able to obtain their own erections naturally, but have difficulty in maintaining them.
The VenoSeal is not designed for use with the ErecAid® System.
The VenoSeal is an Adjustable Constriction Loop that is placed and tightened at the base of the penis.  With proper tension, the VenoSeal device will be comfortable to the user, but also provide enough additional pressure to prevent blood from flowing back into the body thus maintaining an erection.
Tension can be applied for 30 minutes, then the VenoSeal should be removed.
]]>